Table of Contents
Advertisement
Secure the pump rotation with the attached chain
and bracket. Connect the chain to a secure location
on the tractor by looping the hook end around and
hooking it back on itself. Secure the chain with as
little slack as possible to keep the pump from
rotating.
NOTE: When confirming hose lengths, be sure to
watch the lower 3-point arms to avoid damage to
the hydraulic cooler.
6.3.1 Hydraulic Cooler
The Gladiator is equipped with a self-contained
hydraulic
reservoir and
powered by the PTO Pump. This works to cool the
oil used in driving the wing windrower motors. It is
equipped with a hydraulically driven fan to
increase airflow through the cooler. It is up to the
operator to ensure the cooler is kept clean and
free of dust and debris. This will ensure proper
operation and avoid overheating.
When turning the tractor with the implement attached, be careful that no part of the tractor
comes in contact with the hydraulic cooler. This could damage the implement or tractor. A
punctured cooler could create a hazard causing injury or death.
Gladiator RWP-1935 01/23
© 2023 Alamo Group Inc.
OPERATION
conditioner
that is
Operation Section 4-11
Advertisement
Table of Contents
