Table of Contents
Advertisement
Specifications
The RASFinder conforms to the following specifications:
•
Routing Protocols - IP and IPX, and bridging for all others
•
Ethernet LAN Interface - 10Base-T (twisted pair)
•
WAN Interface - 3 async (RS232) Links with RJ-11 jacks
•
Command Port - 19.2 Kbps Asynchronous
•
Two 70-nanosecond 4 MB SIMMs (8 MB, total)
(RAM is expandable to a maximum of 32 MB)
Caution: SIMM speed and size cannot be mixed.
•
1 MB of Flash memory (on two PROMs)
Ethernet Port
•
One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector.
Command Port
•
Single 19.2 Kbps asynchronous Command Port using a short RJ-45-to-DB9 cable with a
DB9 female connector.
WAN Links
•
Three internal V.90 modems* with MultiLink Point-to-Point Protocol for a bandwidth of up to
168 Kbps.
Electrical/Physical
•
Voltage - 100 to 250 VAC, 50/60 Hz
•
Input Voltage - 5Vdc, 1.4A
•
Power Consumption - 10 Watts
•
Dimensions - 1.625" high x 6" wide x 9" deep
•
Weight - 2 pounds (0.92 kg)
Requirement
•
PC with Windows 98/2000/XP or Windows NT, and one available serial COM port to connect
to the Command Port of the RASFinder
*
Though this modem is capable of 56 Kbps download performance, line impairments, public
telephone infrastructure and other external technological factors currently prevent maximum 56
Kbps connections.
MTASR3-200
5.63 cm high x 22.34 cm wide x 33.51 cm deep
Chapter 1 - Introduction and Description
10
Advertisement
Table of Contents
Need help?
Do you have a question about the RouteFinder MTASR3 and is the answer not in the manual?
Questions and answers