Multitech RouteFinder MTASR3 User Manual page 29

Remote access server with integrated wan devices

Hide thumbs Also See for RouteFinder MTASR3:

Table of Contents

4. If you are going to combine the three WAN ports together, i.e., a single IP address, you need to

enable the MLPPP option from the Advanced tab.

Note: When the dialog box "When a PPP port is Client-or-LAN type:" appears, click on the

OK button each time the dialog box appears. You are returned to the Main menu.

5. From the Main menu, click on the IP button and the IP Port Setup dialog box appears with the

Ethernet tab active and the Port Address displaying your LAN IP Address.

Click on the WAN 1 tab

MTASR3-200

Chapter 3 - Software Loading and Configuration

Table of Contents

Rasfinder mtasr3-200