Multitech MultiConnect WF MTS2WFA Quick Start Manual
Serial-to-wi-fi device server
Hide thumbs
Also See for MultiConnect WF MTS2WFA:
- Specification sheet (2 pages) ,
- Reference manual (38 pages) ,
- User manual (14 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Multitech MultiConnect WF MTS2WFA
Summary of Contents for Multitech MultiConnect WF MTS2WFA
- Page 1 MultiConnect™ WF ® Serial-to-Wi-Fi Device Server MTS2WFA MTS2WFA-R Quick Start Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
- Page 3 Introduction This guide shows you how to set up your MultiConnect™ WF Device Server. For detailed information, product specifications, and more, see the User Guide, available on the MultiConnect CD and the Multi-Tech Web site. General Safety This product can be used in both fixed and mobile applications.
- Page 4 Multi-Tech Systems, Inc. Quick Start Guide Handling Precautions All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge. Although input protection circuitry has been incorporated into the devices to minimize the effect of this static buildup, proper precautions should be taken to avoid exposure to electrostatic discharge during handling and operation.
- Page 5 MultiConnect Serial-to-Wi-Fi Device Server Installation and Cabling Attaching the MultiConnect WF to a Fixed Location Typically, the MultiConnect WF is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired mounting location. The mounting holes must be separated by 4-15/16 inches center-to-center.
- Page 6 Multi-Tech Systems, Inc. Quick Start Guide Making the Connections for the MTS2WFA (Externally Powered) Turn off your PC. Place the MultiConnect WF in a convenient location. Connect it to your PC’s serial port and plug in the power. Making the Connections for the MTS2BTA-R Turn off your PC.
- Page 7 MultiConnect Serial-to-Wi-Fi Device Server Optional – Direct DC Power Connection • Connect a fused DC power cable into the power connector on the MultiConnect WF. • Then attach the two wires at the other end of the fused cable to a DC fuse/terminal block on a vehicle in which you are mounting the MultiConnect...
- Page 8 82100350L...
Need help?
Do you have a question about the MultiConnect WF MTS2WFA and is the answer not in the manual?
Questions and answers