RASFinder Setup
All changes to your RASFinder configuration are initiated through the RASFinder - Router Setup
menu. You can view or change your RASFinder configuration in Windows 98, 2000, XP and Windows
NT by clicking Start | Programs | RASFinder | Router Configuration, or double-clicking the Router
Configuration icon in the RASFinder program group, if it displays on your desktop. After loading, the
RASFinder - Router Setup menu displays.
The RASFinder - Router Setup menu consists of 13 buttons that enable you to display and change
your protocols, define the output of the RASFinder, perform network management functions, test the
communications link, print messages received from the target RASFinder, and download setup
information to the RASFinder.
The two outer buttons in the bottom row are used to open the on-line Help system (RASFinder Setup
Help) and end (Exit) a Router Setup session. The middle (Retry) button remains inactive unless you
fail to connect to the target RASFinder.
MTASR3-200
Chapter 4 - RASFinder Software
33