7. The Setup Complete dialog box displays.
Click Finish to continue.
8. The following message displays:
9. Click No to skip the upgrade process. The following message appears:
10. Click Yes to download the default setup. (Clicking No prevents you from setting up the defaults
and downloading them to the RASFinder; instead, you are returned to the desktop, where you
will see a window with shortcut icons for the various utility programs in the software.)
11. The Default Parameters dialog box displays. This dialog box allows you to enable or disable IPX
routing, assign the router name (required for IPX routing), establish the IP address and mask for
the LAN port, set up remote addresses for the WAN ports, and disable unused WAN ports.
12. If your network protocol is IPX, continue with the following step. However, if your network protocol
is IP, click the IPX Routing Enable check box to disable IPX, then proceed to step 14.
MTASR3-200
Chapter 3 - Software Loading and Configuration
18