4. The Choose Destination Location dialog box displays. Follow the onscreen instructions to
install your RASFinder software.
You can either choose a different Destination Location for your RASFinder software by clicking
Browse, or select the default destination by pressing Enter or clicking Next>. It is recommended
that you accept the default folder, C:\RASFind.xxx
5. The Select Program Folder dialog box appears.
Press Enter or click Next> to continue
6. The software is loaded onto your PC. The RASFinder Setup dialog box is then displayed
enabling you to designate the COM port of the PC that is cabled to the RASFinder. From the
Select Port drop-down box, click the down arrow and select the COM port of your PC (COM1 --
COM4) that is cabled to the RASFinder.
Click OK to continue.
MTASR3-200
Chapter 3 - Software Loading and Configuration
17