Table of Contents
Advertisement
Protocols
The Protocols group enables you to limit the remote user to IP routing, IPX routing, or bridging
(Spanning Tree); or, a combination of any two or all three routing protocols. The default setting
enables all three protocols.
User Service Types
The User Service Types group enables you to set the permissions for the entry being configured.
The systems administrator can enable or disable the following options to customize the types of
services for a particular remote user. By default, all permissions are enabled. To deny
permissions to the entry being configured, click (check) the box to the left of the permission to
disable the feature.
•
Outbound Permissions - grants the remote user dial-out rights.
•
Inbound Permissions - grants the remote user dial-in rights.
•
Framed Protocol Permissions - grants the remote user framed protocol rights (e.g.,
Framed Protocol – PPP). By enabling (checking) this option, the user becomes an
unrestricted user (i.e., both framed and unframed protocols are allowed).
•
Telnet Permissions - grants the remote user Telnet file transfer rights.
•
RLogin Permissions - grants the remote user RLogin server connection rights.
Time Limits
The Time Limits group enables the systems administrator to impose time-related restrictions to
the entry being defined.
Note: The SNTP Client check box must be selected in the SNTP Setup dialog box and pointed
to a valid time protocol server in order to monitor Time Limits and Time of the Day Logins.
Time of the Day Logins
The User Permission grid enables the administrator to deny a remote user Internet access at
certain times during the week. This would be applicable when the administrator wants to bring a
system down for a particular reason and does not want users to access the Internet at that time.
By default, all time periods are color-filled with yellow indicating that the remote user has
permission to access the Internet all the time. To deny permission for certain periods of time,
click all applicable yellow boxes over the target time range to toggle them to red (Access
Denied).
7. After each user is defined in the Add Users dialog box and the user permissions (Rights) have
been configured, click OK to display the updated Users List dialog box. Click Filters to add
filtering parameters for the remote user entry.
8. The Filters List dialog box displays.
Click Add.
MTASR3-200
Chapter 3 - Software Loading and Configuration
24
Advertisement
Table of Contents
