Table of Contents
Advertisement
Web Browser Management
The RASFinder can be accessed, via a standard Web browser, from anywhere on the connected
Internet. First, WEB Server must be checked (enabled) on the Applications Setup dialog box to
enable this function. You can then access the RASFinder Configuration dialog box by typing the IP
Address of the unit into the address line of your web browser. The following screen will be displayed:
Go to Login to gain access to the RASFinder. The following dialog box displays:
Type supervisor in the User Name box (no password is needed) and click OK.
Note: Only one user can access the RASFinder at any given time, and this user will have read/write
rights over the unit.
MTASR3-200
Chapter 6 - Remote Configuration and Management
74
Advertisement
Table of Contents
