Table of Contents
Advertisement
Introduction
Multi-Tech's Remote Access Server for Microsoft network users enables users to dial-out and fax-out
through your MTASR3-200. Remote Access Solution software uses Multi-Tech's Communications
Services Interface (MCSI - pronounced "Mik-see"). MCSI is a software redirector which complies
with MCSI/NCSI/NASI defacto standards for software redirection.
©
The Windows
version of MCSI, called WINMCSI, is supported on Windows 98 and NT platforms.
MCSI2000 is supported on Windows 2000 and XP operating systems. MCSI 2000 is documented in
a separate sofware installation guide on your product CD. Refer to the Multi-Tech Communication
Serial Interface for Windows 2000 and XP Software installation Guide for information on MCSI2000.
Since WINMCSI provides data communications connectivity, it needs to be installed and operating
before your data communications application software is started.
Installing and Configuring the WINMCSI Modem-Sharing
Software
The WINMCSI modem-sharing software (included on the CD) manages access to an Asynchronous
Gateway (AG) for outbound calls. It allows Windows communications software packages that do not
support INT6B or INT14 to connect to a gateway. It also detects other compatible communications
servers (e.g., RASs) on your network and displays the resources they provide to eligible LAN users.
1. Power on your client PC and log in to your LAN.
2. Start Windows.
3. Insert the Multi-Tech RASFinder CD into your CD-ROM drive. The RASFinder Splash screen
displays.
4. Click on Install MCSI Utility button. A second window opens, choose the Windows operating
system you wish to install.
5. The Welcome screen displays.
Click Next to proceed with the installation.
MTASR3-200
Chapter 5 - RAS Dial-Out Redirector
60
Advertisement
Table of Contents
