WAGO I/O-SYSTEM 750 510 376 07 Quick Start Manual page 11

Ethernet starterkit 2

Table of Contents

To test the connection, open the DOS shell via Start

ries

Fig. 5: Testing the connection to the 750-841 Controller with "Ping"

If you get no response from the node, contact your network administrator.

All settings can also be viewed and modified via the WebBasedManagement

(WBM).

To do so, start your browser and enter

node (e.g. http://192.168.1.12).

The integrated Web server generates the following Web page:

Fig. 6: Home page of the 750-841 Controller's integrated WEB server

WAGO-I/O-SYSTEM 750

ETHERNET StarterKit 2

Command prompt, and send a PING to the IP address of the node.

Ethernet Network Start-Up

Programs

http://

followed by the IP address of the

Quick Start

• 11

Accesso-

Table of Contents