WAGO I/O-SYSTEM 750 510 376 07 Quick Start Manual page 15

Ethernet starterkit 2

Table of Contents

Fig. 12: WAGO-I/O-PRO CAA, I/O configuration, context menu

Select "Append sub-element". This will open the I/O configuration window

with the I/O module catalog.

Fig. 13: WAGO-I/O-PRO CAA, with I/O configuration dialog

.In the application example shown in section 2.1, a single 750-400 digital in-

put module has been connected to the 750-841 controller, followed by a 750-

501 digital output module. The 750-600 end module is arranged on the very

right hand side.

In the I/O module catalog on the left, first click on "Digital Input" to select the

750-400 module and then move this module to the right into your selection us-

ing the "Insert" button.

Then, select the 750-501 module from the I/O module catalog on the left by

clicking on "Digital Output" and move it to the right into your selection using

the "Insert" button.

If you wish to delete some modules from your selection, select the appropriate

module on the right-hand side and click the "Delete" button.

WAGO-I/O-SYSTEM 750

ETHERNET StarterKit 2

Quick Start

The First Program

• 15

Table of Contents