Table of Contents
Advertisement
12 •
Quick Start
Ethernet Network Start-Up
When using a proxy server, the proxy server must be bypassed for local ad-
dresses. Information on how to bypass the proxy server for local addresses can
be found in the help section of your browser under "Proxy server" or "LAN
settings".
A login is required to access the configuration pages via hyperlinks.
The following users are created by default:
Fig. 7: Users and passwords of the 750-841 Controller's WEB server
Using firmware version (09) and above, the process data can be displayed in
the right window of the "IO config" configuration page. Access to process
data is based on the "GenIoConf.xml" file in the "etc" folder of the node's file
system. Data generation is disabled by default and can be activated on the
"Features" configuration page.
Fig. 8: "IO config" page of the integrated WEB server
The left-side window of the "IO config" configuration page shows the hard-
ware configuration that has been created by CoDeSys as usual.
Write permission to the outputs is assigned by the hardware configuration ei-
ther to the "PLC", the fieldbus 1(Modbus) or the fieldbus 2 (Ethernet_IP).
User
Password
admin
wago
user
user
guest
guest
WAGO-I/O-SYSTEM 750
ETHERNET StarterKit 2
Advertisement
Table of Contents
