Disassembly And Disposal; Disassembly; Disposal - WAGNER PEM-X1 Original Operating Manual

VERSION 09/2012
OPERATING MANUAL
10

DISASSEMBLY AND DISPOSAL

10.1

DISASSEMBLY

Incorrect disassembly!
Risk of injury and damage to the equipment.
Procedure:
1. Switch off the system.
2. Lock the supply of compressed air and decompress system.
3. Disconnect the gun connection cable from control unit.
4. Disconnect the powder feed hose to the spray gun and to the powder injector.
5. Disconnect the atomizing air hose to the spray gun and to the control unit.
10.2

DISPOSAL

Do not dispose of waste electrical equipment with household
refuse!
In accordance with European Directive 2002/96/EC on the disposal
of waste electrical equipment and its implementation in national
law, this product may not be disposed of with the household refuse,
but must be recycled in an environmentally correct manner.
Wagner or one of our dealers will take back your used Wagner waste
electrical or electronic equipment and will dispose of it for you in
an environmentally friendly way. Please contact one of our service
points, one of our representatives or us directly to this purpose.
ORDER NUMBER DOC 2326020
WARNING
Before starting disassembly:
- Switch off the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure system against being switched back on without
authorization.
Observe the operating manual when carrying out all work.
NOTICE
PEM-X1
52