Disassembly And Disposal; Disassembly; Disposal - WAGNER PER-X1 Translation Of The Original Operating Manual

Operating manual Robot powder spray gun PER-X1
11 Disassembly and Disposal
11 DISASSEMBLY AND DISPOSAL
11.1 DISASSEMBLY
WARNING
Incorrect disassembly!
Risk of injury and damage to the device.
4 Before starting disassembly:
4 Switch off the energy and compressed air supply.
4 Ensure the grounding of all system components.
4 Secure system against being switched back on without authorization.
4 Observe the operating manuals when carrying out all work.
1. Switch off the system.
2. Lock the compressed air supply and decompress system.
3. Disconnect the gun connection cable from control unit.
4. Remove the powder feed hose from the spray gun and from the powder injector.
5. Remove the atomizing air hose from the spray gun and from the control unit.
11.2 DISPOSAL
NOTICE
Do not dispose of used electrical equipment with household refuse!
In accordance with European Directive 2012/19/EU on the disposal of used electrical
equipment and its implementation in national law, this product may not be disposed of
with the household refuse, but must be recycled in an environmentally correct manner.
4 WAGNER or one of our dealers will take back your used WAGNER electric or
electronic equipment and will dispose of it for you in an environmentally-friendly
way.
4 Please contact one of our service points, one of our representatives or us directly.
50 Order number 2444998 | Edition 10/2022