Disassembly And Disposal; Disassembly; Disposal - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
10

DISASSEMBLY AND DISPOSAL

10.1

DISASSEMBLY

Incorrect disassembly!
Risk of injury and damage to the device.
Procedure:
1. Switching off the system.
2. Lock the compressed air supply and decompress system.
3. Disconnect the gun connection cable from control unit.
4. Disconnect the powder feed hose to the spray gun and to the powder injector.
5. Disconnect the atomizing air hose to the spray gun and to the control unit.
10.2

DISPOSAL

Do not dispose of used electrical equipment with household
refuse!
In accordance with European Directive 2002/96/EC on the disposal
of used electrical equipment and its implementation in national
law, this product may not be disposed of with the household refuse,
but must be recycled in an environmentally correct manner.
Wagner or one of our dealers will take back your used Wagner waste
electrical or electronic equipment and will dispose of it for you in
an environmentally friendly way. Please contact one of our service
points, one of our representatives or us directly to arrange this.
ORDER NUMBER DOC 2326020
WARNING
Before starting disassembly:
- Switch off the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure system against being switched back on without
authorization.
Observe the operating manuals for any work.
NOTICE
PEM-X1
51