Testing Of The Unit; Important Information On Product Liability; Note On Disposal; Guarantee Declaration - WAGNER PROSPRAY 3.20 Operating Manual

ProSpray 3.20

TESTING OF THE UNIT

For safety reasons, we would recommend having the de-
vice checked by an expert as required but at least every 12
months to ensure that it can continue to operate safely.
In the case of unused devices, the check can be postponed
until they are next started up.
All (potentially deviating) national inspection and mainte-
nance regulations must also be observed.
If you have any questions, please contact the customer ser-
vice team at Wagner.

IMPORTANT INFORMATION ON PRODUCT LIABILITY

According to an EU directive, the manufacturer is only liable
without limitation for faults in the product if all parts come
from the manufacturer or have been approved by the man-
ufacturer and have been mounted to the device and are op-
erated properly. If third-party accessories or spare parts are
used, the manufacturer is exonerated wholly or partly from
his/her liability if use of the third-party accessories or spare
parts have caused a defect in the product. In extreme cases,
the relevant authorities can completely prohibit using the
entire device.
With original WAGNER accessories and spare parts, compli-
ance with all safety regulations is guaranteed.

NOTE ON DISPOSAL

In observance of the European Directive 2012/19/EU on wa-
ste electrical and electronic equipment and implementation
in accordance with national law, this product is not to be dis-
posed of together with household waste material but must
be recycled in an environmentally friendly way!
Wagner or one of our dealers will take back your used Wagner
waste electrical or electronic equipment and will dispose of
it for you in an environmentally friendly way. Please ask your
local Wagner service centre or dealer for details or contact us
direct.

EU Declaration of conformity

We declare under sole responsibility that this product
conforms to the following relevant stipulations:
2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU
Applied harmonised norms:
EN 62841-1, EN 1953, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
The EU declaration of conformity is enclosed with the
product. If required, it can be re-ordered using order
number 2385803.
3 + 2 YEAR GUARANTEE ON THIS WAGNER CRAFTSMAN
PRODUCT
(Status 03.03.2022)
WAGNER exclusively provides the commercial buyer who has
purchased the product from an authorised specialist dealer
(hereinafter referred to as the „Customer") with a warranty
for the products listed on the Internet at https://go.wag-
ner-group.com/3plus2-info in addition to the statutory war-
ranty regulations, unless there is a warranty exclusion.
The warranty period for WAGNER products (devices) in the
craftsmen's sector is 36 months and begins with the date of
purchase of the initial purchase. This warranty period is ex-
tended by a further 24 months if the product is registered
within 28 days of purchase on the Internet at https://go.wag-
ner-group.com/3plus2.
In cases of commercial rental, industrial use (e.g. use in
shift operation) or equivalent use, the warranty period is 12
months due to the significantly higher load. We reserve the
right to carry out a check in individual cases and refuse the
warranty where necessary.
If any material, machining or performance defects are iden-
tified in the device within the warranty period, then the war-
ranty claims must be made immediately and within a period
of no more than 2 weeks following discovery of the defect.
The detailed guarantee conditions can be obtained on
request from our authorised WAGNER partners (see website
or operating instructions) or in text form on our website:
https://go.wagner-group.com/pf-warranty-conditions
UKCA Declaration of conformity
We declare under sole responsibility that this product
conforms to the following relevant regulations:
Supply of Machinery (Safety) Regulations 2018
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012
The Waste Electrical and Electronic Equipment Regulations
2013
Applied harmonised standards
BS EN 62841-1, BS EN 1953, BS EN IEC 55014-1, BS EN IEC
55014-2, BS EN 61000-3-2, BS EN 61000-3-3
EN
Subject to modifications
21