How To Set The User Menu - Furuno RD-20 Operator's Manual

Remote display
Hide thumbs Also See for RD-20:
Table of Contents

Advertisement

1. OPERATION
• Wind direction: Theoretical (default, display indication: "T"), Relative (When the wind blows
from the port, "PORT" is displayed. When the wind blows from the starboard, "STBD" is dis-
played. When the wind direction is 0.0 or 180.0 degrees, there is no indication of "PORT"
nor "STBD".)
Display mode
(T: Theoretical,
PORT/STBD/no indication: Relative)
1.7

How to Set the User Menu

The user menu lets you adjust the RD-20 to meet your needs.
No.
Menu
1
KEY LED BRILL
2
RPM SET ENGINE
(or SHAFT, PITCH)
3
RPM SET No.
4
WIND AVE TIME
5
RUDDER SINGLE
(or STBD, PORT)
6
Direction ARROWS
(or TEXT)
7
DOT LED CAL
8
7-SEG LED CAL
Setting procedures
1. While you hold down the DISP key, press the PWR key to turn on the power.
2. Press the MODE key or the UNIT key to select the screen desired.
3. Press  or  key to set the value then press the MODE key to save the data and go to the
next screen.
4. After you set all options, the screen for saving data appears. Press the MODE key to save the
data. The equipment restarts.
Note: The user menu is inoperative on the RD-501 and RD-502.
WIND
T
084.5
Description
Set the brilliance for key LED.
Select the engine-related data to show from
[ENGINE], [SHAFT], or [PITCH].
Select the number of engine, shaft, or propel-
ler.
Set the wind averaging time to smooth wind
data. The longer the setting, the more the data
is smoothed. To find the momentary wind di-
rection and speed, select the shorter time.
Select the mounting location of the rudder
from [SINGLE], [STBD] (starboard), or
[PORT].
Select the indication of direction from [AR-
ROWS] or [TEXT] for speed, ROT (rate of
turn), rudder and engine/shaft/pitch.
If there is a difference between the dot-matrix
LED brilliance and the 7-segment LED bril-
liance, adjust the DOT LED CAL or 7-SEG
LED CAL so that both brilliances are the
same. -3 is the darkest and 3 is the brightest.
10
DIR
deg
Setting
Default
1 to 8
8
ENGINE,
ENGINE
SHAFT,
PITCH
0 to 9
0
0, 1, 2, 3,
1 min
5, 10 min
SINGLE,
SINGLE
STBD,
PORT
AR-
ARROWS
ROWS,
TEXT
-3 to 3
0
-3 to 3
0

Advertisement

Table of Contents
loading

Table of Contents