Table of Contents
Advertisement
Operating instructions
4.1.2 ON/OFF button
4.1.3 Touch panel
21.
Nozzle
22.
Level pipe
23.
Rinse pipe
24.
ON/OFF button
In the following chapter, figures are given in brackets to clarify what needs to be
done. These numbers refer to image and list above.
The light on the ON/OFF button indicates the following:
•
Off - the machine's main switch is in the OFF position or there is no power
supply to the machine.
•
Blue light – machine in standby mode. The machine's main switch is in the
ON position.
Note: When the main switch is set to the ON position, it will take up to 25
seconds before the ON/OFF button illuminates blue.
•
Green light – machine in operation. The touch panel display illuminates and
can be used.
Note: When the ON/OFF button with a blue light is pressed, it will take up
to 10 seconds before the button turns green and the touch panel
illuminates.
•
Red light - an emergency stop has been pressed or other error. Follow the
instructions on the touch panel display for measures.
General
The panel comprises four fields:
•
A = Top bar
•
B = Process bar
•
C = Activity field
•
D = Bottom bar
Active (clickable) symbols are in blue. Inactive symbols are in grey. The activity
field (C) contains both information text and selectable symbols which are used to
continue to different entries:
WD-18CW
24
Rev. (202211)
Advertisement
Table of Contents
