Table of Contents
Advertisement
Installation instructions
3.10 Documentation
3. Check the setting of the reference values:
All the reference values have been set to the recommended values on delivery.
•
Check that all reference values are correctly adjusted
•
Check that the water temperatures (tank, booster heater, etc.) have been
reached in accordance with the reference values
4. Run a number of washes complete with dishware and check:
•
There are no water leaks
•
The switch for the shutter doors is working
•
Water temperatures are maintained
•
The washed items are clean
•
The washed items are dried
•
There is an adequate water flow to the dishwasher
NOTE! Inform the customer if the water flow and the water pressure of the
incoming water are too low!
•
For steam-heated machines, also check:
The steam valves open and close
The condenser conductors open and close
There is no steam leakage
5. Final check: Empty the machine, turn the machine off using the ON/OFF
button and then turn off the power at the main switch.
•
Re-tighten all connections on contactors and circuit breakers
•
Check that all circuit breakers are in the ON position
•
Set up the quick guide supplied
6. Train and inform personnel concerning:
•
Washing
•
Care (daily, weekly and other frequencies)
•
Recommendation for annual service
For correct use and servicing, it is essential that the documentation
accompanying the machine is made available to personnel who will be using the
machine. The installation and user manual, which describes handling and care
among other things, should be stored near the machine.
WD-18CW
21
Rev. (202211)
Advertisement
Table of Contents
