1. Manuals
  2. Brands
  3. Wexiodisk Manuals
  4. Dishwasher
  5. WD-10S
  6. Installation and user manual

Wexiodisk WD-10S Installation And User Manual

Potwasher/combi-dishwasher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
POTWASHER/COMBI-DISHWASHER
WD-10S
(original documentation)
Read the manual before using the machine!
Installation and user manual
S/N: (En)
Valid from: 202503
Rev.: 0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WD-10S and is the answer not in the manual?

Questions and answers

Related Manuals for Wexiodisk WD-10S

Summary of Contents for Wexiodisk WD-10S

  • Page 1 POTWASHER/COMBI-DISHWASHER WD-10S (original documentation) Read the manual before using the machine! Installation and user manual S/N: (En) Valid from: 202503 Rev.: 0...

  • Page 3: Table Of Contents

    WD-10S Rev. 0 (202503) 1. General instructions ................ 1 1.1 Symbols used ....................2 1.2 Machine rating ....................3 1.3 Checking that the machine and manual correspond ........3 1.4 EU Declaration of Conformity ................4 2. Safety instructions ................5 2.1 General information ..................
  • Page 4 WD-10S Rev. 0 (202503) 3.5 Connections ....................14 3.5.1 Electrical connection ................15 3.5.2 Water connection, regardless of any options .......... 15 3.5.3 Detergent (option) and drying agent ............16 3.5.4 Bleeding the booster pump ..............17 3.5.5 Drain/waste pipe ..................18 3.5.6 Ventilation ....................

  • Page 5: General Instructions

    WD-10S Rev. 0 (202503) General instructions 1. General instructions Read the instructions in this manual carefully as they contain important informa- tion regarding the correct, effective and safe installation, use and servicing of the machine. Service personnel should have access to all documentation for the ma- chine.

  • Page 6: Symbols Used

    WD-10S Rev. 0 (202503) General instructions 1.1 Symbols used This symbol warns of situations where a safety risk may arise. The instructions given should be followed in order to prevent injury and dangerous situations. This symbol on a machine part warns of electrical equipment. The machine must be entirely non-live during servicing, turn off the power at the power switch and if required, the switch should be locked to prevent unintentional operation.

  • Page 7: Machine Rating

    WD-10S Rev. 0 (202503) General instructions 1.2 Machine rating The machine has two rating plates, one of which is placed at the bottom of one side of the machine and the other in the electrical cabinet. The technical informa- tion on the plates is also included on the machine’s wiring diagram. The various...

  • Page 8: Eu Declaration Of Conformity

    A so-called EU Declaration of Conformity is provided on delivery of the machine. CE_16_2 Contact details of the manufacturer (Wexiödisk AB, Mårdvägen 4, SE- 35245 Växjö, SWEDEN, Tel.: +46 470 771200, E-mail: wexiodisk@wexio- disk.com). Representatives of Wexiödisk AB. Person responsible for the product’s documentation.

  • Page 9: Safety Instructions

    WD-10S Rev. 0 (202503) Safety instructions 2. Safety instructions Read the chapter GENERAL INSTRUCTIONS carefully before starting work. 2.1 General information The machine is CE marked, which means that it complies with the requirements of the EU Machinery Directive with regard to product safety. Product safety means that the design of the machine will prevent personal injury or damage to property.

  • Page 10: Transport

    Warranty repairs must be performed by an authorised company. Contact an authorised service company to draw up a programme of preventive care and maintenance. For authorised service companies, please see www.wexiodisk.com or contact Wexiödisk AB. • The regular checks described in the manual must be carried out in accord- ance with the instructions.

  • Page 11: Operation

    WD-10S Rev. 0 (202503) Safety instructions 2.5 Operation • If the machine will not be used for an extended period of time, the power to the machine should be turned off using the power switch, the water supply turned off, and the doors left ajar.

  • Page 12: Installation Instructions

    WD-10S Rev. 0 (202503) Installation instructions 3. Installation instructions Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. 3.1 General information Read these instructions carefully, as they contain important information regarding the correct installation method. • The instructions should be used together with the machine’s wiring dia- gram.

  • Page 13: Rust On Industrial Dishwashers

    WD-10S Rev. 0 (202503) Installation instructions 3.1.1 Rust on industrial dishwashers • Large-scale industrial dishwashers in general as well as our dishwashers are made of stainless materials, but despite this, there are still situations where rust can occur on “stainless” materials.

  • Page 14: Requirements For The Installation Site

    WD-10S Rev. 0 (202503) Installation instructions 3.2 Requirements for the installation site 3.2.1 Lighting In order to ensure the best possible working conditions during installation, opera- tion, servicing and maintenance, make sure that the machine is installed in a well- lit room.

  • Page 15: Transport And Storage

    WD-10S Rev. 0 (202503) Installation instructions 3.3 Transport and storage Always transport the machine in an upright position. Take care during transport, as there is a risk of tipping. NOTE! The machine must not be transported without a pallet or other support. Some form of support beam must always be used along the sides of the machine during transport.

  • Page 16: Unpacking

    WD-10S Rev. 0 (202503) Installation instructions 3.3.1 Unpacking Check that all parts have been delivered by comparing them with the delivery note. Remove the plastic tape, cover and cardboard. If possible, lift using a (pallet) truck. Unscrew the adjustable feet so that they extend below the pallet’s floor level.

  • Page 17: Installation

    WD-10S Rev. 0 (202503) Installation instructions 3.4 Installation 3.4.1 Preparing for the installation Check that there is sufficient room for the machine at the installation location. • Check that correct connections are available for water, electricity, drainage and possibly steam at the installation location. See TECHNICAL SPECIFI- CATIONS.

  • Page 18: Connections

    WD-10S Rev. 0 (202503) Installation instructions 3.5 Connections Anslutningar Connections on the machine Electrical connection Alternative electrical connection Standard machine: Hot water connection Machines with ECO flow (option): Cold water connection Drain connection, flexible hose Plugged hole for detergent connection (option)

  • Page 19: Electrical Connection

    WD-10S Rev. 0 (202503) Installation instructions 3.5.1 Electrical connection Information about electrical connections is available on the machine’s wiring dia- gram which is provided on delivery. Store the diagrams in the plastic pocket, lo- cated in the electrical cabinet, even after installation.

  • Page 20: Detergent (Option) And Drying Agent

    WD-10S Rev. 0 (202503) Installation instructions 3.5.3 Detergent (option) and drying agent • Check what your machine is equipped with, which depends on the model, machine type and country. The equipment will be roughly set at the factory if the machine is equipped with any of these alternatives. Contact your chemical supplier for a more precise setting.

  • Page 21: Bleeding The Booster Pump

    WD-10S Rev. 0 (202503) Installation instructions 3.5.4 Bleeding the booster pump The pump housing must be filled with water before starting the booster pump for the first time. Once the break tank has been filled with water, the booster pump is bled by slackening the bleed screw on the top right-hand side of the pump hous- ing.

  • Page 22: Drain/Waste Pipe

    WD-10S Rev. 0 (202503) Installation instructions 3.5.5 Drain/waste pipe The machine is equipped with a drain pump. The drain/waste pipe connection consists of a spiral hose which is mounted on the machine’s drain pump on delivery. Ensure that the drain connection is kept in place by using e.g. cable ties in the designated areas.

  • Page 23: Equipment Package For The Machine (Option)

    WD-10S Rev. 0 (202503) Installation instructions 3.5.7 Equipment package for the machine (option) The machine can be equipped with a number of different packages with various contents. Check what your machine is equipped with. The various equipment packages place no specific demand on the installation.

  • Page 24: Trial Operation

    WD-10S Rev. 0 (202503) Installation instructions 3.6 Trial operation Prepare the machine for trial operation with the help of OPERATING INSTRUC- TIONS. The instructions describe the measures that must be taken to prepare the machine for operation. 3.6.1 Start-up schedule This should be completed when the machine is started up and used.

  • Page 25: Documentation

    WD-10S Rev. 0 (202503) Installation instructions 5. Run a number of washes complete with dishware and check: • There are no water leaks • The door switch works • The water temperatures are maintained • The washed items are clean •...

  • Page 26: Operating Instructions

    WD-10S Rev. 0 (202503) Operating instructions 4. Operating instructions Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS carefully before starting work. This chapter describes what must be done with the machine: • Before washing • How washing should be performed •...

  • Page 27: Before Washing

    WD-10S Rev. 0 (202503) Operating instructions 4.1 Before washing 4.1.1 Machine design...

  • Page 28: Preparations Before Filling

    WD-10S Rev. 0 (202503) Operating instructions Button for programme P1 (normal load) Button for programme P2 (heavily soiled load) Button for programme P3 (heavily soiled load power) Symbol for programme P4 (heavily soiled load power +) Display Button for changing water Button for emptying machine with internal cleaning Button for ON/OFF.

  • Page 29: Filling And Heating The Machine

    WD-10S Rev. 0 (202503) Operating instructions 4.1.3 Filling and heating the machine You can see what the machine is doing on the machine’s panel. Machine’s display A= The centre of the display shows what the machine is doing and what the ma- chine will do B=The left side of the display shows the “wash”...
  • Page 30 WD-10S Rev. 0 (202503) Operating instructions • Start the machine using the ON/OFF button (8) on the panel. • Close the door. • If the following images are shown on the display, the door must be opened and closed in order to start filling the machine.

  • Page 31: Washing

    WD-10S Rev. 0 (202503) Operating instructions 4.2 Washing To reduce the risk of damage, the dishware should be stacked in the basket sup- plied with the machine which is located on the opened door. As an option, a basin conveyor is available which can be connected in various ways. The basin convey- or can also be fitted with a flushing unit.

  • Page 32: Positioning Of Dishware In The Basket

    WD-10S Rev. 0 (202503) Operating instructions 4.2.1 Positioning of dishware in the basket The machine has a large washing compartment; the basket is 815 mm wide and 670 mm deep, the clearance inside the machine is 820 mm. Basket Basket with 2 x trays...
  • Page 33 WD-10S Rev. 0 (202503) Operating instructions 2 x washing baskets 400x600 mm, can be placed directly in the basket. Inserts for plates, for example, can also be placed in the washing baskets. 1 x washing basket 500x500 mm with glasses, cutlery or plates, for example, can...
  • Page 34 WD-10S Rev. 0 (202503) Operating instructions Equipment for use in the basket (option) To enable different types of items to be handled efficiently, a number of accesso- ries are available for use in the basket. Canteen stand, tall dishware insert with example dishware...
  • Page 35 WD-10S Rev. 0 (202503) Operating instructions Silicone mat (with or without weights) Dishware tray with example dishware...
  • Page 36 WD-10S Rev. 0 (202503) Operating instructions Washing basket insert, Multi, shown here used with trays and canteens...
  • Page 37 WD-10S Rev. 0 (202503) Operating instructions Washing basket insert, Multi, shown here fitted with baskets, which can also be equipped with a cutlery holder lid. Canteen stand for 2 x GN 1-1.
  • Page 38 WD-10S Rev. 0 (202503) Operating instructions Canteen stand 3-compartment GN 1-1 100 mm.

  • Page 39: Symbols On The Machine's Display

    WD-10S Rev. 0 (202503) Operating instructions 4.2.2 Symbols on the machine’s display WD-10S WD-10S_U Machine’s display A= The centre of the display shows what the machine is doing and what the ma- chine will do B=The left side of the display shows the “wash” side in the machine...

  • Page 40: Selecting A Programme

    WD-10S Rev. 0 (202503) Operating instructions 4.2.3 Selecting a programme The control panel has three programme buttons (1 - 3). • (1) P1=Normal load • (2) P2=Heavily soiled load • (3) P3=Heavily soiled load Power • (4) Symbol for P4=Heavily soiled load Power + (soaking and heavily soiled...

  • Page 41: Washing

    WD-10S Rev. 0 (202503) Operating instructions 4.2.4 Washing The machine’s panel • Remove larger food particles by scraping and rinsing the items using a hand shower. The water in the hand shower must not exceed 40° C. Place the items to be washed in the basket.
  • Page 42 WD-10S Rev. 0 (202503) Operating instructions • For longer periods between washes, the machine should be in the “normal” mode and closed. This ensures the temperature in the machine is main- tained. • In the event of a pause between washes, the machine will switch to energy saving mode after 1 hour and ON/OFF (8) will flash green.

  • Page 43: Checking The Wash Result

    WD-10S Rev. 0 (202503) Operating instructions Checking the wash result The dishware should be checked after each wash for: PROBLEM CAUSES & MEASURES Starch spots • Scraping: Important to remove as much food particles as possible before washing. This also means that the water in the machine Misting does not need to be changed as often.

  • Page 44: Changing The Water

    WD-10S Rev. 0 (202503) Operating instructions Changing the water To achieve the best possible washing results, it is important that the water is changed frequently. For normally soiled dishware, the water should be changed after around 30 washes. However, always change the water in the event of foam problems in the tank.

  • Page 45: After Use - Cleaning

    WD-10S Rev. 0 (202503) Operating instructions 4.3 After use – Cleaning HACCP is a preventive inspection system to ensure hygiene requirements are met during the washing process and cleaning of the machine. As a result of its design, the machine meets strict hygiene requirements. Regular, thorough clean- ing is also important from a hygiene perspective.

  • Page 46: Daily Cleaning

    WD-10S Rev. 0 (202503) Operating instructions 4.3.2 Daily cleaning Emptying with internal cleaning • Check that the machine is in the starting position. WD-10S_standby • Open the door. • Remove the tank filter (10). • Close the door. • Press (7) to start the emptying programme.
  • Page 47 WD-10S Rev. 0 (202503) Operating instructions WD-10S_poi The total number of washes made since the machine was used for the first time is now shown. WD-10S_energy This image shows the calculated energy consumption since the start. • Open the door. Check that the washing arms’ (11) and the rinse pipes’ (12) nozzles are clean and that no objects have fallen and become lodged in the machine.

  • Page 48: Cleaning Each Week Or As Required

    WD-10S Rev. 0 (202503) Operating instructions Machines with ECO flow (option) The machine’s heat recovery unit is rinsed clean automatically when the machine fills and during ordinary use of the machine. Externally Wipe the outside of the machine with a soft, damp cloth.

  • Page 49: Operating Problems

    WD-10S Rev. 0 (202503) Operating instructions 4.3.4 Operating problems Check: • Has the appliance been used according to the instructions? • Are all the removable parts in their correct place? • Is the power switch in the ON position? •...
  • Page 50 WD-10S Rev. 0 (202503) Operating instructions CODE CAUSE ACTION Er08 The temperature in the booster heater is The alarm can be reset by pressing ON/OFF on the panel. too low. If the error recurs, contact an authorised service compa- IF09 Alarm for changing the water.

  • Page 51: Troubleshooting

    WD-10S Rev. 0 (202503) Operating instructions Troubleshooting The following errors can be dealt with by the operator. If the problem persists, contact authorised service personnel. PROBLEM CAUSE ACTION No indication on the control pan- Power switch off. Switch on the power switch.
  • Page 52 WD-10S Rev. 0 (202503) Operating instructions When you contact service personnel, you will need to provide the following infor- mation: • Machine type and model. • Machine serial number and date when the machine was installed. • A brief description of the problem. Are any fault codes shown in the dis- play? •...

  • Page 53: Technical Specifications

    WD-10S Rev. 0 (202503) Technical specifications 5. Technical specifications The manufacturer reserves the right to make changes to the technical data. TECHNICAL DATA Washing pump M1, normal load (kW) 0.75 Washing pump M2, heavily soiled load (kW) 2.35 Booster pump M10 (kW) 0.58...
  • Page 54 WD-10S Rev. 0 (202503) Technical specifications CAPACITY AND OPERATING DATA Total washing time, incl. rinsing time, normal load, P1 (min.) * Total washing time, incl. rinsing time, heavily soiled load, P2 (min.) * Total washing time, incl. rinsing time, heavily soiled load power, P3 (min.) * Total washing time, incl.
  • Page 55 WD-10S Rev. 0 (202503) Technical specifications CONNECTION, MACHINE Total connected load (kW) 14.35 Main fuse (A) * (400-415V 3N~ 50Hz) Main fuse (A) * (230V 3~ 50/60Hz) & (200V 3~ 50/60Hz) & (230V 3~ 60Hz) Max. connection area Cu (mm²) ** (400-415V 3N~ 50Hz) (L1-L3 N PE) Max.

Table of Contents