Universal Robots e Series Hardware Manual page 70

It is declared that the above products fulfil, for what is supplied, the following Directives as
detailed below:
(When this incomplete machine is integrated and becomes a complete machine, the integrator
is responsible for determining that completed machine fulfils all applicable Directives and
update the harmonized and other standards.)
Reference the harmonized
standards used,
referred to in Article 7(2) of
the MD and LV Directives
and Article 6 of the EMC
Directive:
Reference to other technical
standards and
specifications used:
The manufacturer, or his authorised representative, shall transmit relevant information about the
partly completed machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas,
certificate #DK013489.
UR5e
(I) EN ISO 10218-1:2011 TÜV Nord Certificate # 44 708 14097607,
(I) EN ISO 13849-1:2015 TÜV Nord Certificate # 44 207 14097610,
(I) EN ISO 13732-1:2008, (I) EN ISO 13849-2:2012,
(I) EN ISO 13850:2015, (I) EN ISO 14118:2018, (I) EN 60204-
1:2018, (I) EN 60947-5-5:1997+A1:2005 +A11:2013+A2:2017
(II) EN 60320-1:2015+AC:2016, (II) EN 61131-2:2007
(II) EN 60529:1991+A1:2000:A2:2013, (II) EN 61140:2016
(III) EN 61000-3-2:2019, (III) EN 61000-3-3:2013,
(III) EN 61000-6-2:2019, (III) EN 61000-6-4:2019,
(III) EN 61000-6-1:2019 UR3e & UR5e ONLY
(III) EN 61000-6-3:2007+A1: 2011 UR3e & UR5e ONLY
(I) ISO 9409-1:2004 [Type 50-4-M6], (I) ISO/TS 15066 as
applicable, (I) EN 60947-5-8:2020
(II) EN 60664-1:2007, (II) EN 60664-5:2007, (II) EN 61784-3:2010
[SIL2]
(III) EN 60068-2-1: 2007, (III) EN 60068-2-2:2007, (III) EN 60068-2-
27:2008
(III) EN 60068-2-64:2008+A1:2019, (III) EN 61326-3-1: 2017
[Industrial locations SIL 2]
ISO 14664-1:2015 [Cleanroom Class 6 for control assembly with
enclosure and Class 5 for UR3e, UR5e UR10e and UR16e
manipulators]
70
10. Declarations and Certificates
Hardware Manual