Universal Robots e Series Hardware Manual page 69

10. Declarations and Certificates
10. Declarations and Certificates
EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010
Manufacturer
Person in the Community
Authorized to Compile the
Technical File
Description and Identification
of the Partially-Completed
Machine(s):
Product and Function
Model
Serial Number
Incorporation:
It is declared that the above products fulfil, for what is supplied, the following Directives as
detailed below:
(When this incomplete machine is integrated and becomes a complete machine, the integrator
is responsible for determining that completed machine fulfils all applicable Directives and
update the harmonized and other standards.)
The following essential requirements of the EU Machinery Directive have been fulfilled:
I Machine Directive
2006/42/EC
II Low-voltage Directive
2014/35/EU
III EMC Directive
2014/30/EU
Hardware Manual
Universal Robots A/S
Energivej 25
DK-5260 Odense S Denmark
David Brandt
Technology Officer, Research and Development
Universal Robots A/S
Energivej 25, DK-5260 Odense S
Industrial robot (multi-axis manipulator with control box and
with or without Teach Pendant). Function is determined by the
completed machine (with end-effector and intended use).
UR3e, UR5e, UR10e,UR16e (e-Series). Below cited certifications
and this declaration include:
• Effective October 2020: Teach Pendants with 3-Position
Enabling (3PE TP) and standard Teach Pendants (TP).
• Effective May 2021: UR10e specification improvement to
12.5kg maximum payload.
Starting 20205000000 and higher
Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e) shall
only be put into service upon being integrated into a final
complete machine (robot system, cell or application), which
conforms with the provisions of the Machinery Directive and
other applicable Directives.
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.5,1.2.6, 1.3.2, 1.3.4, 1.3.8.1,
1.3.9, 1.5.1, 1.5.2, 1.5.5, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3,
4.1.3
It is declared the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the Machinery
Directive.
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used
below.
69 UR5e