Universal Robots e Series Hardware Manual page 57

5. Maintenance and Repair
5.3.4. Control Box Visual Inspection
1. Disconnect the power cable from Control Box.
2. Check for any dirt/dust outside the Control Box.
• Clean with ESD vacuum cleaner if needed.
NOTICE
Using compressed air to clean inside the Control Box can damage components.
• Do not use compressed air to clean inside the Control Box.
5.3.5. Freedrive Inspection
1. Unmount attachment or set TCP/Payload/CoG according to tool specifications.
2. To move the robot arm in Freedrive:
• On a standard Teach Pendant, press and hold the Freedrive button.
• On a 3PE Teach Pendant, rapidly light-press, then light-press-and-hold the 3PE button.
Standard TP
Hardware Manual
3PE TP
57 UR5e