Maintenance - Vatech Premium PAX-i3D User Manual

13. Cleaning and Maintenance
13.2

Maintenance

VATECH requires periodic constancy tests to ensure image quality and the safety for
the patient and the operator.
Only VATECH-authorized technicians can perform inspection and service for the
equipment. For technical assistance, contact VATECH service center or your local
VATECH representative.
13.2.1 Regular Maintenance
Do not unplug cables by force.

Do not expose the equipment or components in an area which is susceptible to

water or humidity.
Do not expose the equipment in an area of extreme fluctuation in temperature,

poor ventilation, direct sun light, dust, salt, etc.
Keep all detachable components well organized and clean.

Make sure that the equipment is well grounded.

Never try to modify this equipment, including the wires or cables. Doing so may

damage it beyond repair.
144
Always turn off the equipment before performing any maintenance.

Never remove equipment covers. There are no repairable parts

inside.
The only parts that can be replaced by the user are the input fuses,

which must comply with the manufacturer's specifications.
As a precaution against fire, the replacement should be the one in

the same type and range.
There are no user serviceable parts inside this equipment.

If any service is required, please contact VATECH service center

or your local VATECH representative.
PaX-i3D Green Premium™ User Manual