Vatech Premium PAX-i3D User Manual page 82

7. Acquiring PANO Images
4.
Let the patient bend the head backward around 10˚-15˚.
5.
Align the Vertical Beam to the center of the patient's face. (It can prevent the acquired
image from being expended left or right.)
6.
On the Console Software, Click NEXT button when the exposure parameter setting is
completed. On the Touch Screen, a confirmation window will appear after NEXT button
is clicked. Click OK button if the setting is correct.
(In case NEXT button has been already clicked, you will see pop-up window directly.)
<Console Software>
7.
You can see the patient through the Touch Screen. Make sure that the patient's
Frankfurt line is tilted about 10˚-15˚ from the horizontal lines of the screen.
76
Be careful the patient does not to touch the equipment with their jaw.
Doing so may cause difficulty to maintain the proper position to get
images of good quality.
When you click NEXT (OK in Touch Screen) button,
 The Rotating Unit will come down to the positioning location.
 The vertical Laser Beam will be activated to make patient positioning
easier.
 The DAP (Dose Area Product), Scan Time and Exposure Time will be
displayed below Patient Information window.
<Touch Screen>
PaX-i3D Green Premium™ User Manual