Table of Contents
Advertisement
Carpus
1.
Make sure that the patient's upper arm is aligned with the Carpus Guideline engraved
on the bottom surface of the Rotating Unit as shown below. If necessary, adjust the
height by using the Rotating Unit UP/DOWN button on the Control Panel.
2.
Let the patient put the right hand splaying on the inner side of the Rotating Unit as
shown below. Make sure that the patient does not bend his / her fingers.
3.
On the Console Software, Click NEXT button when the exposure parameter setting is
completed. On the Touch Screen, a confirmation window will appear after NEXT button
is clicked. Click OK button if the setting is correct.
(In case NEXT button has been already clicked, you will see pop-up window directly.)
<Console Software>
PCT-90LH User Manual
8. Acquiring i-CEPH Images (Optional)
<Touch Screen>
91
Advertisement
Table of Contents
