Vatech Premium PAX-i3D User Manual page 30

4. Imaging System Overview
No.
1
LED lights (TOP) &
2
Eye marks (#2,#3)
3
LED light (BOTTOM)
4
5
Open/Close button
6
7
Component Storage
8
9
10
11
12
13
14
24
Item
Displays the status of X-ray exposure.
- Green: Ready
LED Lamp
- Yellow: X-ray ON
 LED Lamps provide enough light for 3D
 Eye marks help to position the patient' head
Helps to position the patient' head correctly when
Eye mark (#1)
taking a 3D photograph.
 LED Lamp provides enough light for 3D
& 3D PHOTO
Camera  3D PHOTO Camera takes 3D photograph.
Handle Frame Opens/closes the Handle Frame.
 Sets imaging condition according to a capture
Touch Screen
 Displays the status of patient positioning.
Enclosed The place where Bite Blocks, Chinrest Ass'y and the
other components can be stored.
Holds the patient's head during i-CEPH mode
Headrest
imaging.
Chinrest The place to rest the chin.
Controls the height of the Rotating Unit and Chinrest,
Laser Beam On/Off.
Prepares exposure by clicking READY button after
Control Panel
setting the capture conditions and patient's
positioning.
For the details, refer to 3.5.1 Control Panel.
A Chair used for patient positioning
Maximum weight allowed: 180 Kg or Under
Chair
Base Balances the equipment and maintains its safety.
X-ray Detector Xmaru3104CF for PANO, i-CEPH and CT
X-ray Generator The vacuum tube where the X-ray is produced.
Description
Photography.
correctly when taking a 3D photograph.
photography.
mode.
In case a wheelchair must be used for
specific patients, the overall height of the
wheelchair must not exceed the
designated line. For the details, refer to
the Wheelchair Height Limit CAUTION
Label attached on the equipment.
PaX-i3D Green Premium™ User Manual