Table of Contents
Advertisement
Hygiene
All removable patient support components (the Bite Block, the Chinrest, the
Headrest) can be cleaned using alcohol-based cleaning solutions.
Clean the Support Handles by using alcohol-based cleaning solutions before
taking photos of next patient.
Other surfaces of the equipment, including the Touch Screen, can be cleaned
using a soft cloth dampened with a mild cleaning solution.
New hygiene cover must be provided for each new patient to prevent the
transmission of communicable disease.
Condensation
Extreme fluctuation in temperature may cause condensation to develop inside the
equipment. Do not turn on the equipment until it has reached room temperature.
Cooling
Allow the proper amount of cool down time (for the X-ray tube to cool down)
before acquisition of next image.
-
Mode of operation: Continuous operation with intermittent loading
-
Exposure time: Max. 18 s / Resting time: 10 min.
-
Column operation time: 1 min / Resting time: 9 min.
If the temperature inside the tube head reaches 60 °C (140 °F), X-ray exposure
will cease and an error message will be displayed. Normal X-ray capabilities will
resume after the generator reaches 58 °C (136.4 °F).
PCT-90LH User Manual
Always disconnect the equipment from the power outlet when
disinfecting the surfaces of the equipment.
Never expose this equipment to liquids, mists or sprays. Exposing this
equipment to liquids may cause an electric shock or otherwise damage
the system.
Do not use spray cleaners on the equipment, as this could cause a
fire.
Do not use aerosol or spray cleaning agents directly on the surface of
the equipment.
3. Warnings and Precautions
11
Advertisement
Table of Contents
