Vatech Premium PAX-i3D User Manual page 18

3. Warnings and Precautions
Turning the equipment on / Adjusting the height of the equipment
Do not position the patient near the equipment while it is initiating as the patient

could be injured if the equipment malfunctions.
Ensure that the patient is kept clear of the equipment while adjusting its height.

Emergency stop
If a problem occurs during image acquisition, press the red Emergency Stop

Switch to immediately stop all moving parts and cut off all power to the
equipment. (Emergency Stop Switch is located under the Handle Frame. Turn
the switch in the direction of the arrow to reboot the equipment.)
Trouble-free operation
Never use this equipment in an environment that is susceptible to explosion.

Always operate the equipment within a temperature range of 10 °C to 35 °C

(50 °F to 95 °F) for the safe operation. Image quality may deteriorate if the
equipment is operated outside of this range.
Always allow the equipment sufficient time to warm up (while switched on) if it has

been exposed to temperatures of below 10 °C (50 °F).
Only perform X-rays of patients if system is in full working order.

Always ensure that equipment movement is not obstructed by the patient's

clothing, medical device (such as a wheelchair), or the patient themselves.
Do not leave the patient unattended around the equipment.

Remove all radio-controlled devices, mobile phones, etc. from the X-ray room

prior to image acquisition as these objects may cause the equipment to
malfunction.
Modifying the equipment
Modifying the equipment in any way which may affects the safety of the operator,

patients or other persons is prohibited by law.
No part of this equipment is serviceable by the operator. All maintenance and

repair of this equipment must be performed by a VATECH qualified service
technician.
This product may only be operated with original VATECH accessories or third-

party accessories expressly approved by VATECH.
12 PaX-i3D Green Premium™ User Manual