Vatech Premium PAX-i3D User Manual page 71

4.
Insert the Bite Block into the Chinrest and cover it with a sanitary vinyl cover.
5.
Let the patient bite the Bite Block along its grooves with his/her front teeth.
6. On the Console Software, Click NEXT button when the exposure parameter setting is
completed. On the Touch Screen, a confirmation window will appear after NEXT button
is clicked. Click OK button if the setting is correct.
(In case NEXT button has been already clicked, you will see pop-up window directly.)
<Console Software>
When you click NEXT (OK in Touch Screen) button,
 The Rotating Unit will come down to the positioning location.
PCT-90LH User Manual
 The sanitary vinyl cover is for single use only. It should be replaced
for each patient. Be sure to use the approved vinyl cover.
 Clean the Chinrest and the Bite Block with ethanol and wipe with a
dry towel before the next patient.
7. Acquiring PANO Images
<Touch Screen>
65