Table of Contents
Advertisement
Attribute
Access rule
ID
6
Set
13
Set
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
Description
Data type
IP address
UDINT
Network mask
UDINT
Gateway address
UDINT
Primary name server UDINT
Secondary name
UDINT
server
Domain name
STRING
Host name
STRING
Encapsulation idle
UINT
time
6.4 Supported CIP objects for EtherNet/IP
Default value
IP address of the device The value 0 indicates that no IP
Network mask of the
device
Standard gateway
address
0x00000000
0x00000000
0x0000 (length = 0,
empty CHARACTER
STRING)
Not supported (length
zero)
120
EtherNet/IP
Value semantics
address was configured. Other-
wise, a valid address of class A, B
or C must be set but not the
loopback address (127.0.0.1).
The value 0 indicates that no
network mask address was con-
figured.
The value 0 indicates that no IP
address was configured. Other-
wise, a valid address of class A, B
or C must be set but not the
loopback address (127.0.0.1).
The value 0 indicates that no
name server address was config-
ured. Otherwise, a valid A, B or C
address must be set.
The value 0 indicates that no
secondary name server address
was configured. Otherwise, a
valid A, B or C address must be
set.
ASCII characters. Maximum per-
missible length is 48 characters.
Must be increased to an even
number of characters (increase is
not included in length). The
length 0 indicates that no do-
main name is configured.
ASCII characters. The maximum
permissible length is 64 charac-
ters. Increased to an even num-
ber of characters (increase is not
included in length). The length 0
indicates that no host name is
configured.
0 = disabled
1 to 3600 = timeout in seconds
93
Advertisement
Table of Contents
