EtherNet/IP
6.2 Integration into the automation system
Selecting IO modules
1. Select the IO module from the hardware catalog for each slot and drag it onto the slot.
Note
The possible slots for the selected IO module are highlighted in green.
Deleting IO modules
1. Select the IO module to be deleted.
2. Click "Delete" in the shortcut menu.
Example
Assuming that you want to read 128 bytes and write 64 bytes on network side X1 from
network side X2, you need to configure the following for network side X1 in MFCT:
Information on how to configure network side X2 with STEP 7 (TIA Portal) with GSD file is
available at "Configuring the PN/MF Coupler with GSD file (Page 41)".
68
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler