Siemens SIMATIC 6ES7158-3MU10-0XA0 Hardware Installation And Operating Manual page 80

Output buffer
The following table shows the output buffer for the example configuration for the I/O data
alignment Word:
Slot Name*
1 Slot1_1_Id_0_Outputs
Slot1_1_Id_1_Outputs
3 Slot3_1_Id_0_Outputs
Slot3_1_Id_1_Outputs
4 Slot4_1_Id_0_Outputs
Slot4_1_Id_1_Padding
6 Slot6_1_Id_0_Outputs
Slot6_1_Id_1_Outputs
Slot6_1_Id_2_Outputs
Slot6_1_Id_3_Outputs
Slot6_1_Id_4_Outputs
Slot6_1_Id_5_Outputs
Slot6_1_Id_6_Outputs
Slot6_1_Id_7_Outputs
Slot6_1_Id_8_Outputs
Slot6_1_Id_9_Outputs
Slot6_1_Id_10_Outputs
Slot6_1_Id_11_Outputs
* The name is formed according to the following scheme: Slot<Slot#>_<Subslot#>_Id_<Id#>_<DataItem-TextId>
The sum of the output data is 18 bytes.
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
Data Byte Description
type offset
Byte 0 OUT 2 Byte
Byte 1
Byte 2 OUT 2 Byte
Byte 3
Byte 4 OUT 1 Byte
Byte 5 Padding byte
Byte 6 PROFIsafe IN/OUT 6 Byte / 12 Byte
Byte 7
Byte 8
Byte 9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14
Byte 15
Byte 16
Byte 17
6.2 Integration into the automation system
EtherNet/IP
79