EtherNet/IP
6.2 Integration into the automation system
Selecting the MF device from the network and loading the configuration
1. Ensure that the network interface selected on the "Settings" tab is connected to the desired
MF device.
2. Select the "Network" option under "Select MF device from".
3. Click "Start scan".
4. Select the desired MF device from the list. Devices without MultiFieldbus support cannot be
selected and are grayed out.
5. Click "Create new project".
The current configuration is read out from the MF device and added to the MF project. MFCT
then goes to the next step "Configure Station" for review and editing.
66
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler