6.2.2.6
Selecting a station
You can create the configuration of the MF device in two ways:
• From the catalog if the real MF station is not available.
• From the network if the MF station is available online.
Selecting the MF device from the catalog
1. Select the "Catalogue" option under "Select MF device from".
2. Select the desired MF device, e.g. ET 200SP under "Select MF device".
3. Assign a name for the MF device under "Device name".
4. Select the desired interface module under "Short designation".
5. Click "Create Selected MF Device".
The MFCT automatically goes to the next step, "Configure Station".
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
6.2 Integration into the automation system
EtherNet/IP
65