Table of Contents
Advertisement
Technical specifications
8.1 General technical specifications
Mechanical environmental conditions
The following table specifies the mechanical environmental conditions for the described
components for sinusoidal vibrations.
Table 8- 6
Frequency range
5 ≤ f ≤ 8.4 Hz
8.4 ≤ f ≤ 150 Hz
10 ≤ f ≤ 60 Hz
60 ≤ f ≤ 1000 Hz
Reduction of vibrations
If the described components are exposed to stronger shocks or vibrations, take appropriate
measures to reduce the acceleration or the amplitude.
We recommend mounting the described components on damping materials (for example,
rubber-metal vibration dampers).
Tests for mechanical environmental conditions
The following table provides information about the type and scope of the tests for
environmental mechanical conditions.
Table 8- 7
Tests for mechanical environmental conditions
Test for ...
Test standard
Vibrations
Vibration test accord-
ing to IEC 60068-2-6
(sinusoidal)
Shock
Shock, tested accord-
ing to IEC 60068-2-27
Continuous shock
Shock, tested accord-
ing to IEC 60068-2-27
122
Mechanical environmental conditions
PN/MF Coupler for operation
with a BusAdapter without an
RJ45 socket
3.5 mm amplitude
1 g constant acceleration
0.35 mm amplitude
5 g constant acceleration
Comment
Type of vibration: Frequency sweeps with a rate of change of
1 octave/minute.
BusAdapter with an RJ45 socket
•
5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
•
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration
BusAdapter without an RJ45 socket
•
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
•
60 Hz ≤ f ≤ 1000 Hz, 5 g constant acceleration
Duration of vibration: 10 frequency sweeps per axis in each of three per-
pendicular axes
Type of shock: Half-sine
Shock intensity: 150 m/s
Direction of shock: 3 shocks in +/- direction in each of three perpendicular
axes
Type of shock: Half-sine
Shock intensity: 25 g peak value, 6 ms duration
Direction of shock: 1000 shocks in +/- direction in each of three perpen-
dicular axes
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler for operation with
a BusAdapter with an RJ45 socket
---
peak value, 11 ms duration
2
PN/MF Coupler
Advertisement
Table of Contents
