EtherNet/IP
6.2 Integration into the automation system
6.2.2.9
Transfer the configuration
The "Transfer configuration" area offers you the following options:
• Download the project to the MF device.
• Export the configuration for use in other engineering tools.
Downloading the project to the MF device
To transfer the MF project to the MF device, follow these steps:
1. Select the "Transfer the project to the MF device" check box.
2. Click "Start scan" to scan for MF devices via the preset network interface for the project
download. Devices without MultiFeldbus support cannot be selected and are grayed out.
3. Select an MF device and start the download to the MF device using the "Start
transfer/export" button.
70
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler