Fault rectification of the timeout on transfer to the MF device
• Check the accessibility of the MF device via the network interface selected in MFCT.
• Terminate the connection of the MF device to PROFINET IO controllers.
• If you have selected the "Use router for gateway" option in the network parameters, check
the network parameters of the device.
Export of configuration
1. Select the "Export configuration for use in other engineering tools" check box.
2. Assign a name and a path for the export
3. Select the file formats to be exported:
– MultiFieldbus Configuration Tool (MFCT) project
– User Defined Data Type (UDT) (as l5x file)
– Comma Separated Values (CSV)
– Electronic Data Sheet (EDS)
4. Start the export using the "Start transfer/export" button.
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
6.2 Integration into the automation system
EtherNet/IP
71