Table of Contents
Advertisement
EtherNet/IP
6.2 Integration into the automation system
Transfer/export status
The progress and result of the file export and project download are each displayed. The
fieldbus selected in the MF device as well as any differences between the configured and real
hardware are also displayed.
6.2.3
Configuration in the engineering system
6.2.3.1
Configuration in the engineering system
You can export the EDS station description and the User Defined Type (UDT) that you need
for the configuration in the engineering system for EtherNet/IP using MFCT. If no other
directory was selected during export, the files are located in the directory of the MFCT
project.
Alternatively, the EDS station description can also be found in the installation directory of
MFCT.
6.2.3.2
Import EDS station description
To import the EDS station description into the engineering system, proceed as described in
the documentation of the engineering system.
6.2.3.3
Importing a user-defined type (UDT)
To import the user-defined type (UDT) as an l5x file into the engineering system, proceed as
described in the documentation of the engineering system.
72
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler
Advertisement
Table of Contents
