Table of Contents
Advertisement
Assembling
3.5 Applying reference identification labels
3.5
Applying reference identification labels
Procedure
Proceed as follows to apply a reference identification label:
1. Break off the reference identification labels from the sheet.
2. Insert the reference identification labels into the opening on the PN/MF Coupler. The
insertion opening is located on the top in each case.
Note
Reference identification label
The printable side of the reference identification label must face forward.
①
②
Figure 3-1
24
Reference identification labels
Insertion openings
Applying reference identification labels
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler
Advertisement
Table of Contents
