Table of Contents
Advertisement
Technical specifications
8.2 Technical specifications PN/MF Coupler (6ES7158-3MU10-0XA0)
Article number
Power loss
Power loss, typ.
Address area
Address space per module
•
Address space per module, max.
Address space per station
•
Address space per station, max.
Hardware configuration
Submodules
•
Number of submodules per station, max.
Interfaces
Number of PROFINET interfaces
Optical interface
1. Interface
Interface types
•
Number of ports
•
integrated switch
•
BusAdapter (PROFINET)
Protocols
•
PROFINET IO Device
•
Open IE communication
•
Media redundancy
2. Interface
Interface types
•
Number of ports
•
integrated switch
Protocols
•
PROFINET IO Device
•
Open IE communication
•
Media redundancy
Interface types
RJ 45 (Ethernet)
•
Transmission procedure
•
10 Mbps
•
Autonegotiation
•
Autocrossing
126
6ES7158-3MU10-0XA0
4 W; For 24 V input voltage and 2 plugged BA 2x
RJ45 If BusAdapters with an optical interface are
plugged, there is an additional 750 mW per opti-
cal interface (3 W with 2 plugged BA 2x LC)
254 byte; max. 254 bytes of input data and 253
bytes of output data
1 440 byte; per input / output
116
2; One PROFINET interface per line side
No
2; via BusAdapter
Yes
Yes; compatible BusAdapters: BA 2x RJ45, BA 2x
FC, BA 2x M12
Yes
Yes
Yes; as MRP client, maximum of 50 nodes in the
ring
2; via BusAdapter
Yes
Yes
Yes
Yes; as MRP client, maximum of 50 nodes in the
ring
PROFINET with 100 Mbit/s full duplex (100BASE-
TX)
No
Yes
Yes
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler
Advertisement
Table of Contents
