Table of Contents
Advertisement
3.6
Strain relief
Article number
6ES7193-6RA00-1AN0 (5 strain relief units incl. screws)
View
Figure 3-2
Properties
• The strain relief is a mechanical protective device for the electrical PROFINET cables on the
BusAdapter.
• The strain relief is suitable for all optical and electrical PROFINET cables of the BusAdapter.
• The strain relief is an optional accessories.
• The cable ties are not included in the delivery. We recommend cable ties with a width of
4.8 mm. The maximum width is 7.0 mm. The length of the cable tie is min. 60 mm.
• The PROFINET cables are not inserted on the BusAdapter. The inserted PROFINET cables
hamper the mounting of the strain relief.
• BusAdapter and strain relief can be mounted separately.
Required tools
Screwdriver TX10 (torx).
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
Strain relief
Assembling
3.6 Strain relief
25
Advertisement
Table of Contents
