Table of Contents
Advertisement
EtherNet/IP
6.2 Integration into the automation system
6.2.2
Configuring with MFCT
6.2.2.1
Settings
In the "Settings" tab, you can specify basic properties of the MultiFieldbus Configuration Tool:
• Select the user interface language.
• Select the network adapter.
You can also update the GSD file used.
Language selection
Under "Language selection", select the user interface language for the MFCT.
Network adapter
Under "Network adapter", select the interface you want to use to connect to MF devices.
Hardware catalog
In the "Hardware catalog" section, you can update the GSD module description in the MFCT
using the "Install new GSDML file" button.
To do this, proceed as follows:
1. Click the link in the text.
2. Download the zipped GSD file and save it locally.
3. Unzip the GSD file.
4. Click "Install new GSDML file" and select the unzipped GSD file.
60
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler
Advertisement
Table of Contents
