EtherNet/IP
6.2 Integration into the automation system
6.2.2.5
Open MultiFieldbus project in MFCT
You can open an existing MultiFieldbus project in the "Home" tab:
1. Select "Open project".
– Under "Recently Used Projects", you can select a recently edited project and read it in
– Alternatively, you can use the "Browse" button to open a project file.
The project is opened and the MFCT switches to the "Configuration" tab.
Note
The "Delete" button allows you to delete an existing project from the "Recently Used Projects"
list. The project file itself is not deleted by this action.
64
directly by double-clicking it or using the "Open" button.
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
PN/MF Coupler