Parameters - Siemens SIMATIC 6ES7158-3MU10-0XA0 Hardware Installation And Operating Manual

Table 5- 5 Configuration in subnet 2 (bus side X2)
Transfer area Virtual
slot
Transfer_area_1 1
Transfer_area_2 2
Transfer_area_3 3
Transfer_area_4 4
GSD from bus side X2
Click the "Export" button in the "Export generic station description file (GSD)" field in the
transfer mapping. The "Export device description (GSD)" function is offered for X2. Enter the
path and the file name. Then select "Export".
The GSD file is created for the PROFINET page X2. And you can use them, for example, for
other machine manufacturers.
5.2.6

Parameters

Table 5- 6
Parameter
Voltage check PS1
Voltage check PS2
Diagnostics Undervoltage
Data validity display DIA
Diagnostics for data validity
Diagnostics for error in other
network
Diagnostics for difference in
network configuration
You can assign the parameters separately for the two sides of the PN/MF Coupler.
STEP 7 generates interrupts (e.g. when monitoring a power supply) separately for each side.
Voltage check PS1 / PS2
If you have enabled the voltage check PS1 / PS2, the PN/MF Coupler diagnoses the failure of
the power supply on the two bus sides independent of one another. Only activate the voltage
check if the corresponding power supply is actually connected.
PN/MF Coupler
Hardware Installation and Operating Manual, 07/2020, A5E50018670-AA
5.2 Configuring, parameter assignment and commissioning with PROFINET IO
Type I-length
OUT
IN 8
OUT
IN 8
Parameters for the PN/MF Coupler
Range of values
deactivated/activated
deactivated/activated
deactivated/activated
deactivated/activated
deactivated/activated
deactivated/activated
deactivated/activated
Q-length
2 Byte(s)
Byte(s)
8 Byte(s)
Byte(s)
PROFINET IO
I-address Q- Access
address
10...11 CPU2
8...15 CPU2
12...19 CPU2
16...23 CPU2
Default setting
deactivated
deactivated
deactivated
deactivated
activated
activated
activated
45