Enabling Softstart At Shutdown; Soft Start Ramp Status; Current Limit Settings; Peak Current Limiter During Softstart - gefran GRM-H 15 Configuration And Programming Manual

5.6.1.4. Enabling softstart at shutdown

Acronym
PS.S.E
Enabling softstart ramp at shutdown in ON/OFF software switching.
Options:
0 Shutdown ramp disabled
1 Shutdown ramp enabled
Status

5.6.1.5. Soft start ramp status

Acronym
Expert  Status  Diagnostic
STATUS3
Soft start ramp status.
bit
2
3
5.6.2.

Current limit settings

For GRM-H-x-x-x-AC-x-x-x-x-x and GRM-Hx-
x-x-FB-x-x-x-x-x models only
It is possible to limit the peak current during the

5.6.2.1. Peak current limiter during softstart

Acronym
Cu.S.E
Peak current limitation enabled during the softstart phase.
Options:
0 Disabled
1 Enabled
App / GF_eXpress menu
Power Control
App / GF_eXpress menu
Meaning
Phase soft start on
Phase soft start end
App / GF_eXpress menu
Power Control
819XX_MAN_GRM-H_11-2022_ENG_pag. 65
Attribute Retentive
Description
R/W
■
Attribute Retentive
Description
R -
softstart ramp or the RMS current during
steady state operations (when any softstart ramp is
finished).
Attribute Retentive
Description
R/W
■
U.M. Default
- 0
U.M. Default
- -
U.M. Default
- 0