Enable Memory For Power Fault Alarms; Ssr_Short Update Time; Voltage And No_Current Alarm Filter - gefran GRM-H 15 Configuration And Programming Manual

5.2.2.2. Enable memory for Power Fault alarms

Acronym App / GF_eXpress menu
PF.m
Enable memory for Power Fault alarm: after the causes that triggered the PF alarms have
disappeared, the alarms remain on until reset by key, serial line or IO-Link.
Options:
0 Disabled
1 Enabled

5.2.2.3. SSR_SHORT update time

Acronym App / GF_eXpress menu
dG.t
SSR_SHORT alarm update or wait (in seconds) for alarm activation.
min...max: 1 ...999 s
5.2.2.4. NO_VOLTAGE and NO_CURRENT alarm filter
Acronym App / GF_eXpress menu
dG.F
Time filter for NO_VOLTAGE and NO_CURRENT alarms
Note: it is recommended to set a value not lower than the cycle time.
min...max: 0 ...99 s
Alarms  PF alarms
Alarms  PF Alarms
Alarms  PF Alarms
819XX_MAN_GRM-H_11-2022_ENG_pag. 43
Attribute Retentive
Description
R/W
■
Attribute Retentive
Description
R/W
■
Attribute Retentive
Description
R/W
■
U.M. Default
- 0
U.M. Default
s 10
U.M. Default
s 10