Mitsubishi Electric MELDAS C6 Programming Manual page 325

15. Measurement Support Functions
(4) If skip signal parameter Pp is not specified, the skip condition specified by the G31 parameter
works. If speed parameter Ff is not specified, the skip speed specified by the G31 parameter
works.
Relations between skip and multi-step skip
Skip specifications
G31 X100 ;
Without P and F
G31 X100 P5 ;
Without F
G31 X100 F100 ;
Without P
G31 X100 P5 F100 ;
(Note) "Parameter" in the above table indicates that specified with a skip command (G31).
(5) If skip specification is effective and P is specified as an axis address, skip signal parameter P
is given priority and axis address P is ignored.
(Example)
G31 P500. F100 ;
(6) Those items other than (1) to (5) are the same with the ordinary skip function (G31 without P).
x
Condition
Program error (P601)
Program error (P602)
Program error (P601)
Program error (P602)
This is regarded as a skip signal parameter and program error (P35)
results.
317
15.4 Multi-step skip function 2
Speed condition
Skip 1
Command
value
Skip 1
Command
value
o
Speed
Parameter
Parameter
Command
value
Command
value