Mitsubishi Electric MELDAS C6 Programming Manual page 214

13. Program Support Functions
Integrating (run-out) time (#3001, #3002)
The integrating (run-out) time can be read during automatic operation or automatic start or values
can be substituted by using variable numbers #3001 and #3002.
Type
Integrating
(run-out) time 1
Integrating
(run-out) time 2
The integrating run time returns to zero in about 2.44 × 10
G65P9010 T
Suppression of single block stop and miscellaneous function finish signal waiting
By substituting the values below in variable number #3003, it is possible to suppress single block
stop in the subsequent blocks or to advance to the next block without waiting for the miscellaneous
function (M, S, T, B) finish (FIN) signal.
#3003
0
1
2
3
(Note 1) #3003 is cleared to zero by NC reset.
Contents when
Variable
Unit power is switched
number
3001
Same as when
1ms
power is switched off
3002
(allowable
ms;
time) To
subprogram
Local variable
Entered in local
variable #20
T#20
Single block stop
Not suppressed
Suppressed
Not suppressed
Suppressed
206
13.5 User macro specifications
Initialization of
contents
on
Value substituted
for variable
11
ms (approximately 7.7 years).
O9010
#3001=0 ;
WHILE [#3001LE#20] DO1 ;
END1 :
M99 ;
Allowable time portion :
DO1-END is repeated and when
allowable time is reached, operations
jumps to M99.
Miscellaneous function finish signal
Awaited
Awaited
Not awaited
Not awaited
Count condition
At all times while
power is ON
In-automatic start